Search Results

Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.

The big engine that could With the stringent EPA 2015 regulations on large diesel engines for locomotive, marine, and stationary generator applications, the need for NOx reduction via urea SCR catalyst arises given the proven performance of urea SCR. Monitoring hydraulics Component producers and vehicle service providers offer their views of hydraulic diagnostics as the industry moves toward real-time, intelligent health monitoring, predictive failure software algorithms, and wireless notification. Engine management expands from minute movements to full vehicle Electronic controls grow in complexity as engine designers extend their scope to include hydraulics.

After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Perkins Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Sustainability matters Cummins Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Ready for more Eaton Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Unskew the talent system and build a sustainable future Sauer-Danfoss Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Value-added engineering takes time out of the equation Bosch Rexroth Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Focusing on technology, for sustainability Mentor Graphics Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Knowledge-keep it, don't lose it Dana Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Sustainability driven by technological innovation and global footprint MathWorks Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Moving toward sustainable product development with model-based design TDT Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Aerodynamic design methodology meets commercial challenges in off-highway industry

Biofuel opportunities and pitfalls Annual growth in biofuels has been strong but is expected to slow in the near future. User interfaces going mainstream Off-highway HMIs use consumer technologies to add functions, simplify tasks. Reducing the environmental impact of hydraulic systems OEMS and their suppliers are creating new hydraulic systems and components, using new fluids and remanufacturing to save energy and reduce the environmental impact of off-highway equipment. Multiple controllers add to EV complexity Model-based design has revolutionized the way products are developed, with design shifting from parts to the whole.

Hybrids step forward Electric and hydraulic systems trim fuel consumption and emissions, boost performance. Braking for safety Researchers developed a simplified ABS/EBS ECU test bench to research the brake force control function of the EBS system using HIL simulation technology. A metered look at dosing pumps High delivery accuracy, low weight, and dependably long life have made solenoid-operated pumps widely used in mobile applications.

Simulating off-highway hybrids With customers squeezed by fuel costs, off-highway OEMs are showing some interest in developing hybrid equipment. CAE simulation tools are needed because of lack of experience with such devices. Their functional complexity requires control system simulation throughout their lives. A hose is a hose is a hose Researchers develop a method for the precise mounting of a hydraulic hose model. Integrity sensing for safety Researchers from Purdue developed a capacitance-based method for monitoring the integrity of tires, hoses, and other polymeric products during manufacturing and throughout the useful product life.

National Instruments Keeping pace with increasingly intelligent machines Molex Autonomous equipment positioned to be next disruptive technology Sauer-Danfoss Speed wins IAV Engineering in the virtual world Mentor Graphics What will save us from electrical system design complexity? Perkins Designing for diversity TTControl Intelligent controls and connectivity Federal-Mogul Technology strategies for the future Dana Innovation that addresses global megatrends dSPACE Can you imagine your life without challenges? Tenneco Technology meets regulatory challenges Southco Shifts in design energy Bosch Rexroth Manufacturing and logistical excellence MathWorks Continuous improvement to meet new challenges

Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks Small engine landscape Kubota engineers developed new small-displacement engines that adopt a common-rail system while optimizing the combustion system and injection characteristics. Sensitive to safety A growing number of digital sensors are among the tools being used to make sure failures are rare and injuries are even more infrequent.

Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.

Tackling biodiesel's technical challenges Caterpillar researchers are working to mitigate biodiesel's negative effects on engine components and aftertreatment systems. More for less Telematic systems are offering more features and functions for lower prices. Improving actuation speed and controllability With high-speed hydraulic proportional valves, the performance of existing cam phasing systems can be improved or the actuation mechanisms can be applied directly to engine valve actuation.

Heavy-duty engine design What are the most significant factors influencing the way engine developers approach near-term design and development cycles? Two experts provide their insights from recent programs. Reducing winter range loss for electric trucks Researchers at the Austrian Institute of Technology have developed an air exchange system that's capable of reducing heat load by 37% in real-world tests. Narrower focus, bigger payoff Design teams are targeting focused markets for their commercial electric-vehicle programs to combat challenges like range and infrastructure. Removing complexity for autonomous trucks Narrowing the operating domains for driverless commercial vehicles reduces the requirements of autonomous technology and speeds time to market. Plastics innovations 2019 The 49th annual SPE Automotive Awards highlight the ongoing benefits of lightweight polymers and composites.

Electric machines find their niche Smaller machines working in cities are particularly ripe for electrification, but most off-highway applications will retain the internal-combustion engine. Big data, big benefits Data mining helps users and equipment developers use data from on-vehicle sensors to work more efficiently. Data connectivity in harsh environments Ensuring high-speed data transmission requires OEM designers to think more about components, placement and the impact of environmental conditions early in design. Trucks with intuition Perceptive Automata partners with Volvo Trucks to demonstrate AI technology that can determine when pedestrians will cross the road. Change is afoot Cummins and its CTO help focus the 2019 SAE COMVEC on the fast-shifting technology landscape that faces both on- and off-highway sectors. Editorial AI, ADAS & AVs-oh my!

On the verge of the Digital Age Increasingly connected electrohydraulic systems and machine controls allow the high degree of controllability that's essential for automated operations. Miserly power systems Engineers push engine, transmission technologies to turn off fuel usage. All options on the table Powertrain developers who spoke at SAE COMVEC are leaving no stone unturned in their quest to trim emissions. Cab air quality: A critical component of operator comfort Focus on defining cab air quality, measuring it, and designing the needed performance into cabin designs and HVAC systems is intensifying. Expanding fast charging faster Tritium works to accelerate installation of DC fast-charging infrastructure to keep up with growing demand for commercial EVs.

Bullish on biomethane The CEO of CNH Industrial says biomethane is cleaner path than electric, as Case demos the alt fuel in cool wheel-loader concept. Unique hybrids required Power systems expert at Perkins stresses that on-highway electric solutions cannot be directly applied to the more-rugged and varied applications in off-highway. Getting driverless trucks onto roadways Autonomous developers at TuSimple address many technical issues, but they also must consider regulations and operating modes. Stronger, quieter cabs Worthington expert sees AHSS and active noise cancellation making off-highway cabs safer and less-stressful places to work. Hydrogen boom! Nikola reveals Two and Tre fuel-cell trucks and its H2 fueling roadmap, as well as battery-electric military and powersports vehicles. Rearview cameras come into sight Momentum is building behind replacing mirrors with camera monitor systems as the technology edges closer to regulatory approval.

Connections dig deeper More aspects of vehicle operation are being improved by leveraging cellular links. An OBE for the SAE Meet Paul Mascarenas-SAE International's 2019 president. He's a staunch advocate for professional development for engineers, amid the mobility industry's transformation. Advancing aftertreatment Engineers push for more efficient, cost-effective, and smaller aftertreatment systems for off-highway diesel engines, addressing challenges such as better particulate filtering and low-temp NOx conversion. Developing for defense Suppliers to the commercial vehicle segment optimize-read: ruggedize-their product offerings for the tougher terrain encountered by military vehicles. Going digital & electric @ bauma 2019 Digitalization and electrification are dominant themes in the equipment and technology being revealed at this year's largest trade show for construction and mining. Editorial Bigger barrier to CBEVs: Batteries or infrastructure?

Over-the-air affair Remote updating of software and firmware on commercial trucks and off-highway machines is on the rise, not only for maintenance functions but also to add new features like operator-assist technology. Developments in engine-based gensets With demand for generator sets steady and regulatory change settling, suppliers can rationalize their offerings and push improvements in areas like noise abatement and economy. Testing, testing and even more testing The commercial-vehicle market is eager to adopt more ADAS and automated-driving innovations, but before those technologies get to the road they must first pass rigorous testing practices that prove their efficacy. Smart and connected powertrains FPT Tech Day reveals multi-power Cursor X concept, other "4.0 innovations" for hydrogen fuel cell, electric and natural gas propulsion.

Shifting design of autonomous architectures Electronic controls centralize while providing commercial-level reliability. Next steps toward battery-electric Class 8 trucks Employing a common architecture and shared technologies allows Volvo Trucks to speed up electric-truck conversion, but battery technology and infrastructure still prove challenging. Moving metal AM forward Additive-manufacturing system providers still see technical and throughput challenges, but significant developments and market inroads will be made in 2020. ConExpo roundup New equipment launched in Las Vegas ranges from small electric machines to large next-gen excavators and everything in between.