Search Results

Introducing Neil Schilke, SAE President for 2001 General Motors' former top engineer brings a systems engineering mentality, along with high expectations, to the SAE presidency. ISS beginning to shape up Since the addition of the Zvezda Service Module, assembly activities on the International Space Station have been ramped up to meet the program's completion goal of 2006. Maintaining the space station International Space Station partners will face many challenges once assembly is complete- one of which is the maintenance and upkeep of this new satellite. E-commerce taking off Still in its infancy, e-commerce is expected to have a major impact on aviation companies from all segments of the supply chain.

Hydrostatic transmissions in conventional envelopes Kubota designed a hydrostatic transmission for a compact tractor to improve operator control and increase efficiency and productivity. Design of a hydraulic free-piston engine Dutch companies Noax and Innas have developed an engine in which nearly all combustion energy is directly converted into hydraulic energy. Optimizing tractive performance Canadian researchers correlate analytical predictions and experimental data to determine that the proper matching of front- and rear-tire sizes, aswell as careful control of inflation pressure and normal load of the tires, is necessary to achieve optimum tractive performance of four-wheel-drive tractors. Actively suspending off-road vehicles The University of Texas Center for Electromechanics evaluated a retrofit electromechanical active suspension that s hows promise of improved cross-country mobility for military vehicles.

Low-altitude wind shear Researchers investigate the influences of low-altitude wind shear on takeoff, landing, and other low-level flight. Prepare for launch Lockheed Martin and its suppliers are gearing up activities to launch the first Atlas V launch vehicle before the end of the year. Modeling aircraft hydraulic systems Honeywell Normalair Garrett Ltd. and Flowmaster Inc. have developed a new approach to managing the complex and varied tasks required for the simulation of aircraft systems.

Solving the driver distraction problem Is voice-recognition technology the silver bullet? No, engineers agree, but it has its place. Succeeding in the alliance game It was General Motors' Arvin F. Mueller, Chairperson of the SAE 2001 World Congress, who came up with "Succeeding in the Alliance Game" as the theme for the March 5-8 automotive engineering event in Detroit. Ferrari 360 aerodynamic development The search for downforce without aerodyamic devices, such as wings or spoilers, led to novel solutions for the car's suspension. Renault's Euro 3 engine Flexible injection systems allowed Renault VI engineers to balance many conflicting priorities in developing Europe's first heavy-duty diesel engine with a fully electronic high-injection-pressure common-rail injection system. Meeting future emissions standards with diesel SUVs AVL List believes that diesel engines could be one way to improve the environmental acceptance of sport utility vehicles.

Ford's new four The largest engine development program in company history will lead to at least 200 applications, starting with the new Mondeo's Duratec HE and replacement of its existing cast-iron-block four-cylinders with higher aluminum content powerplants. GM Powertrain's new inline six for SUV's For the first time in nearly two decades, three new General Motors vehicles will feature an inline six-cylinder engine developed by GM Powertrain. Fuel-stratified injection from VW Though gasoline direct-injection technology is being introduced in the Lupo FSI, VW says it easily can be adapted for high-volume use in larger vehicles such as the Polo and Golf. LS6 for Z06 The latest high-performance Corvette engine features improved breathing, new pistons, an increased compression ratio, and a new high-profile camshaft.

Lightpipe design According to Breault Research Organization, any off-highway instrument or control that needs illumination is a candidate for a lightpipe to take light from where it is generated to where it is needed. The biodiesel choice Experts from the Natural Biodiesel Board believe it is time to consider alternatives to the current fuel structure. One solution to rising fuel prices is the pursuit of biodiesel fuels. Understanding machining difficulties in gray iron Bosch Braking Systems' engineers look more closely than usual at iron brake rotor samples to give new insights into critical characteristics of the material. Caterpillar mining for customers With commodity prices low, Caterpillar wants to make mining as productive an enterprise as possible for customers.

Noise and vibrations control A variety of active and passive methods can be used to reduce cabin noise and fuselage vibration. Bringing efficiency to flight testing To meet itsgoal of one new aircraft activity each year, Bombardier's Flight Test Center has sought to reduce aircraft development cycle time by focusing on test planning, safety, and configuration control. Propulsion flight testing Originally conceived for just the GE90 aircraft engine program, GE Aircraft Engines' Boeing 747 flying test bed has evolved into the company's primary commercial engine test aircraft. Top technologies for 2000 Each month, "Aerospace Engineering" publishes the latest technologies. The "Aerospace Engineering" editors have reviewed thousands of reader responses during the past year and have chosen the "best of the best" along with runners-up.

HID for both beams Automotive Lighting engineers have developed HID lighting for high-beam as well as low-beam functions. High-flux LED light sources Hella's advances in LED design provide new options for signal lights and styling variations for indirect lighting. Top 10 technologies for 2000 Readers have selected the most interesting technology stories appearing in Automotive Engineering International during the past year. The rankings are based on reader responses from feature articles and shorter technology items. Some of the stories appear here in shortened form. Synthetic diesel engine oil Researchers at ExxonMobil have developed an advanced lubricant for heavy-duty diesel engines. Disel Emission Control--Sulfur Effects The objective of this government-industry program is to determine the impact of fuel sulfur levels on emissions-control systems of diesel engines.

Quality in the integrated product team In the early phases of product development, quality must be engineered and managed into the product. Advancing icing detection Engineers are working to develop a capability to detect icing conditions ahead of aircraft using onboard and ground-based remote sensing systems. Testing times Methods for testing aircraft engines have changed dramatically over the years for Rolls-Royce- almost as much as the engines themselves. This is the last installment of a three-part series on aircraft engine testing.

Getting the aero advantage Team Rahal has come up with several innovative ways of integrating and implementing Fluent Inc.'s computational fluid dynamics softwarae into its engineering process. Jordan Grand Prix benefits from 3-D design This motorsports team's transition from 2-D design to 3-D digital modeling using SDRC's I-DEAS software has resulted in shorter lead times and improved part fit. The 2002 Explorer/Mountaineer Ford engineers further improve ride, handling, and safety while increasing the vehicles' power. Cadillac's re-engineered Escalade The 2002 model has a host of new, advanced features including "Northstar-inspired" powertrains, StabiliTrak stability control, and a Road Sensing Suspension system. Explorer Sport Trac breaks new ground Ford says its 2001 Explorer Sport Trac, based on the 2001 Explorer four-door, was engineered for improved ride and handling, and is the first traditional SUV with an open cargo area.

Designing a high-performance electrohydraulic actuator Researchers at the University of Saskatchewan and the University of Toronto adopted a new design strategy for development of a new high-performance acutation system. Off-highway, online The Big Three automakers made big news in February by announcing the formation of a single Internet portal for conducting business-to-business e-commerce. Although no such B2B megasite yet exists for the off-highway industry, a number of separate Internet sites offer similar services to the agricultural and construction segments. Off-highway transient driving cycle Southwest Research Institute and the EPA teamed to determine the necessary emissions tests and certification cycles needed for off-highway engines. Benchmarks in tractor development Norm Swinford discussed the evolution of tractor technology at the 2000 SAE International Off-Highway & Powerplant Congress & Exposition in September.

Speed is king Motorsports offers automakers a fast way to develop new technologies and quick-thinking engineers. This article explores how DaimlerChrysler, Ford, and General Motors approach motorsports as an engineering tool. Electronics: changing the shape of the automobile The decisions made by the automotive industry the next few years will forever change the shape of the automobile. The electronic technologies to improve fuel economy, increase passenger safety, lower emissions, and improve reliability are evolving quickly, but because of their cost the exact timeframe for their implementation is undecided. Chevrolet Corvette The Z06 is the big news for 2001, the new model having a high-output 5.7-L LS6 V8 developed by GM Powertrain. Innovation meets the mid-size segment The 2001 Chrysler Sebring and Dodge Stratus offer more power, enhanced NVH characteristics, and improved safety. Third-generation M3 The all-new high-performance M3 coupe debuts in North America.

Implementing CAD systems Several aerospace companies have employed new CAD systems to achieve cost savings as well as improved functionality. Nose gear shimmy damping Lord Corp. has adapted surface-effect technologies to the development of nonhydraulic nose gear shimmy dampers.

Simulating air-conditioning performance A computer program developed by Modine Climate Systems and Modelogics helps determine and optimize air-conditioning system performance. Reduced mass haul-truck design concepts Liebherr Mining trucks adopted a reduced structural mass approach to convert unladen weight directly into payload, while simultaneously incorporating state-of-the-art driveline technology. Optimizing a tractor frame for improved cabin NVH To address an aging agricultural workforce and modern ergonomic guidelines, researchers at Doshisha University and Kubota modeled medium- and large-sized agricultural tractors to reduce vibration and noise and increase comfort. Applying 3d-CAD to turbocharger development Ishkawajima-Harima Heavy Industries has developed a 3d-CAD system for turbochargers. satisfying requirements for digital mockup development.

Improving lightweight vehicle dynamics Bosch engineers used numerical simulation to evaluate vehicle concepts using variable semi-active components, tire specifications, and suspension spring rates. Dr. Reitzle's prescription for Jaguar His vision for the brand is to "use top-level technology and do so in a very emotional way." Dual-voltage power networks Lear Automotive EEDS has developed an innovative electrical and electronic architecture to handle future high-power requirements in vehicles. New door closure concepts Bosch and Temic engineers are developing technologies for passive entry, vehicle immobilization, and remote control. TwinCAN: one module for two nodes The ability to use one module to control two CAN nodes provides benefits including reduced hardware and software requirements, improved functionality, and lower CPU load, according to Infineon researchers.

All go for browser launch The Boeing Co., Lockheed Martin Corp., BAE Systems, and Raytheon Co. follow in the footsteps of the Big Three automakers in seeking to establish a single Internet portal for conducting business-to-business e-commerce. The journey to more electric In anticipation of the increased use of electronics in place of hydraulic systems, TRW Aeronautical Systems is developing new system architectures and technologies for a "more electric" aircraft. Taking the flight path to improvement Using lean principles and innovative technology, Lockheed Martin Aeronautics Co. strives to better its manufacturing processes by reducing cost, waste, and assembly time.

Cabin window design The expanded operating conditions of the Gulfstream V aircraft required engineers to redesign the cabin window to provide for a longer service life, lighter weight, and improved functionality. European wind tunnels This first in a two-part series on global wind tunnel use and capabilities investigates several European research organizations' facilities.

The battle of the metals Engineers continue to improve the properties of metal and evolve manufacturing technologies to enable metals to maintain, or achieve more of, a competitive presence in vehicles. Global Concepts This second of two parts reviews some of the more significant vehicles from past year's motor shows and showcases trends in design and technology from the world's auotmakers. Good Vibrations AEI takes a look at what some companies are doing to improve vehicle NVH. Asia after the storm This final segment of AEI's three-part look at doing business in the digital age focuses on suppliers and OEMs in Asia. Producing fully dense PM parts A new process from PM Krupp Technologies Inc., F2, is suitable for producing fully dense parts that are too expensive to machine or cast, or that require the high strength, hardness, and durablity that conventional (low-density) powder metal cannot provide.

Simulated combustion chamber burn-through Engineers at Rolls-Royce investigated this potential event using numerical simulation. X-planes A technological overview of several historical X-series experimental aircraft.