Refine Your Search

Search Results

Magazine

Automotive Engineering: April 2017

2017-04-01
Thought leadership at WCX17 Proliferating electrification and performance. Clarity of purpose Honda's 2017 Clarity Fuel Cell has impressive performance, zero emissions and zero range anxiety. Clarity is ready for the mainstream, but is hydrogen fuel? Lightweighting hinges on the details Multi-material design approaches require careful integration of all adjacent constituents. Haptic feedback for gesture-control HMI Mid-air gesture controls rely on sophisticated sensing to aid the human-machine interface and help keep drivers' eyes on the road. Road-efficient mud machine Jeep's new Compass benefits from a trick AWD system co-developed with GKN. Past as prelude to the future SAE's Mobility History Committee brings a trove of knowledge- and cool technology. The new Fellow from Ricardo Prof. Neville Jackson will be recognized as an SAE Fellow at WCX17.
Magazine

Automotive Engineering: March 2017

2017-03-02
Thought leadership at WCX17 Lucid Motors' David Moseley: EV or ICE, "It is all physics" New eye on the road One of the industry's hottest tech suppliers is blazing the autonomy trail by crowd-sourcing safe routes and using AI to learn to negotiate the road. Mobileye's co-founder and CTO explains. Hard, slick and ready to roll A tough, self-renewing catalyst coating developed at Argonne National Laboratory provides unprecedented friction and wear protection for vehicle powertrains, the inventors claim. Sensor ICs, semiconductors and safety To achieve ISO 26262 compliance, engineering practices must be taken to a higher level. The following insights may prove valuable for getting there. New VCR targets 40% BTE Variable-compression ratio with VVA from France's MCE-5.
Magazine

MOBILITY ENGINEERING: March 2017

2017-03-01
A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.
Magazine

MOMENTUM: MARCH 2017

2017-03-01
'Not just a student club' How the University of Toronto Aerospace team (UTAT) came to redefine the mission and structure of the design team. Success doesn't come by chance In an SAE International technical paper, students at the University of Idaho identify best practices for their SAE Clean Snowmobile Challenge team. Winning formula Auburn University team hopes to carry forward the momentum of victory at the 2016 Formula SAE Lincoln competition into 2017.
Magazine

Aerospace & Defense Technology: February 2017

2017-02-02
Open Standard Middleware Enables New HPEC Solutions Cooling Your Embedded System What Can Your Open Standard Architecture Handle? Evaluating Key Certification Aspects of Multicore Platforms for Safety Critical Avionics Applications Simulating and Analyzing Flow for an Air-to-Air Refueling System The Ins and Outs of Spaceflight Passive Components and Assemblies Development of High Quality 4H-SiC Thick Epitaxy for Reliable High Power Electronics Using Halogenated Precursors Silicon Based Mid-Infrared SiGeSn Heterostructure Emitters and Detectors Reconfigurable Electronics and Non-Volatile Memory Research Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely Low Energy Consumption Electronics
Magazine

Automotive Engineering: February 2017

2017-02-02
WCX17 Preview The annual SAE World Congress is rebranded WCX17 to express its expanded experience of new-technology discussion and established thought leadership. Achates powers toward production Achates Power's internal-combustion solution is a new play on an old technology. Inside the Bolt EV While the new battery deserves credit for the car's +200-mile range, systems optimization, careful motor design and proprietary CAE tools were equally important. CES 2017: Lush luxury EVs, sophisticated connectivity Suppliers challenge OEMs in advanced tech. Editorial: Question mark or exclamation point Supplier Eye Are you prepared for greater electrification? SAE Standards News VS committees fully engaged on cybersecurity.
Magazine

MOMENTUM: FEBRUARY 2017

2017-02-01
Formula ETS: a new beginning This year's Formula SAE car features a complete chassis redesign. Trimming processes for advanced steels Greater quality control improves automotive manufacturing trimming processes for high-strength steels, resulting in reduced levels of scrap. Getting on the right track SAE Collegiate Chapter involvement opens the door to invaluable experiences and beneficial networking opportunities.
Magazine

Automotive Engineering: January 2017

2017-01-01
Thought leadership at WCX17 Magna's CTO talks innovation and disruption at WCX17, the newly rebranded SAE World Congress. Patton's new campaign As new SAE International President for 2017, Doug Patton will advocate STEM, "cultivation" of prospective young engineers. New EEAs for the connected, autonomous future OEMs and their Tier-1 partners are revamping vehicle electronic and electrical architectures with "über brain" central computers and real-time Ethernet to feed tomorrow's data-hungry cars and trucks. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Autonomy, connectivity headline the 2017 Consumer Electronics Show The automotive component of CES expands as global anticipation for automated driving and enhanced connectivity intensifies. Editorial: Vital Transformation Supplier Eye The impact of shifting to the 'softer' side.
Magazine

SAE Off-Highway Engineering: December 2, 2016

2016-12-02
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
Magazine

Automotive Engineering: December 1, 2016

2016-12-01
Editorial: What's old (and revered) is new again Toyota sticking with measured, 'Teammate' approach to autonomous development Straight-sixes are back (with electrification) at Mercedes-Benz McLaren faces the electrified and autonomous future Can low-volume supercars survive amid stringent CO2 regs and robot cars? McLaren is betting £1 billion on a speedy, powerful-and independent-sports-car future. New Peugeot SUVs jump to modular platform, increase composites use Mercedes EQ concept previews 2019 electric SUV 2017 Nissan Rogue adds hybrid system with EV-only mode Renault's kids' racer
Magazine

MOBILITY ENGINEERING

2016-12-01
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
Magazine

Aerospace & Defense Technology: December 2016

2016-12-01
Additive Manufacturing How 3D Printing Will Transform the A&D Support Chain Advances in Lightweight Electronics Protection Conformal Coatings Increase Reliability of Aerospace and Military Assemblies Powering Outer Space An In-Depth Look at Aerospace Battery Technology Using High Bandwidth Oscilloscopes to Analyze Radar and Electronic Warfare Systems Bio-inspired Airborne Infrastructure Reconfiguration (BioAIR) EMI Analysis Software Helps Telescope Group Simulate RFI Mitigation Epitaxial Growth of Rhenium with Sputtering Processing and Characterization of Polycrystalline YAG (Yttrium Aluminum Garnet) Core-Clad Fibers Multi-Scale Analysis of Deformation and Failure in Polycrystalline Titanium Alloys Under High Strain Rates Abrasion Testing of Products Containing Nanomaterials Spectrum Fatigue of 7075-T651 Aluminum Alloy under Overloading and Underloading
Magazine

Automotive Engineering: November 3, 2016

2016-11-03
SAE Convergence 2016 Talk of the healthy aspects of disruption mingles with SAE's renowned technical emphasis to foster the auto industry's continuing evolution toward electrification and autonomy. The Battery Man Speaks The speed of progress in automotive lithium batteries has impressed AABC's Dr. Menahem Anderman. So has silicon-graphite anode technology development from Tesla and Panasonic. Industry 4.0: The smart factory arrives The plants that produce automotive systems and vehicles are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. Editorial: Promise of 48 volts is no shock Nissan unveils variable-compression-ratio ICE for 2018 Infiniti production model Optimizing engine oil warm-up strategies for 'real-world' driving In search of higher-energy-content batteries Making Multiphysics fast and convenient I.D.
Magazine

Momentum: November 2016

2016-11-01
The comeback car The Cal Poly Pomona FSAE Team implements several measures to help overcome setbacks and achieve a podium finish at Formula SAE Lincoln. Going deep The uBox concept car developed as part of Clemson's Deep Orange program features a uniquely formed roof part. Creating a monster North Dakota State University SAE Clean Snowmobile Challenge team brings to life a war-torn engine pieced together with parts from another.
Magazine

SAE Off-Highway Engineering: October 7, 2016

2016-10-07
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
Magazine

Automotive Engineering: October 6, 2016

2016-10-06
Steering Mazda's unique course A chassis engineer at heart, Chairman Seita Kanai challenges his engineers to think differently and embrace the Skyactiv technology that has made Mazda a benchmark. Delphi's multi-domain mindset From tackling the cyber threat to putting 48-volt hybrids with Dynamic Skip-Fire on the road, Engineering VP Mary Gustanski is harnessing a technology powerhouse. The evolving tire-development paradigm Advanced tire-simulation modeling allows tire development to keep pace with accelerated vehicle-development cycles. MEMS the word for next-gen HUDs New high-speed, quad-channel laser diode drivers are designed to beat the LCD and DLP incumbents for next-gen vehicle head-up displays.
Magazine

Momentum: October 2016

2016-10-03
All about the engine The University of Wisconsin-Madison team increases engine displacement and implements exhaust gas recirculation to maintain winning ways in SAE Clean Snowmobile Challenge. Fluid mechanics of diesel injection studied at Penn State Special photography method helps student researchers get a better look at spray patterns. Under new management A senior-heavy squad from Minnesota State University, Mankato, takes a different approach to team dynamics and jumps 34 spots to 17th overall at the 2016 Formula SAE Michigan competition.
Magazine

Aerospace & Defense Technology: October 2016

2016-10-03
Achieving Performance Advantages in Unmanned Systems Unmanned Vehicle Systems (UVS) are reaching new levels of functionality and performance, and it's not just for air vehicles either. COTS Embedded Systems and Link Budgets The days of proprietary embedded computing systems in military systems are numbered. Custom Designing Enclosures Using 3-D CAD Modeling Due to the advancement of 3-D computer-aided design software, enclosure manufacturing is not what it used to be. Technology advances industry. Fiber Optic Multi-Sensing Platforms Enabling Innovation Across Aerospace Organizations RECAT Wake Turbulence Recategorization New Concept for Improving the Performance of Electrically Small Antennas Microwave Radiometer for Advanced Nanosatellite Control Systems Secret Sharing Schemes and Advanced Encryption Standard SIPHER: Scalable Implementation of Primitives for Homomorphic Encryption Using Mathematics to Make Computing on Encrypted Data Secure and Practical
Magazine

Automotive Engineering: September 1, 2016

2016-09-01
Solving the Greenhouse Gas puzzle While automakers and policymakers debate the TAR, engineers and product planners prepare for the steep climb to meet GHG and CAFE rules beyond 2022. Revving up thermal characterization in the component lab The latest generation of high-speed infrared cameras can capture airbag deployments and other fast-moving actions quickly and accurately. C3 consortium aims for soot solution A newly formed group of companies led by CFD specialists Convergent Science targets exhaust particulate reduction in the combustion chamber. Inside the autonomous vehicle With less focus on driver needs, comfort, safety, and occupant productivity will become key. Editorial: Bad gas?
X