Criteria

Text:
Content:
Display:

Results

Viewing 3391 to 3420 of 5663
2012-05-30
Magazine
Efficient, low-cost power converters for EVs Losses when power converters change the currents, voltages, and frequencies of electrical fees mean efficiencies are in high demand for EVs and everything else electric.
2012-05-25
Magazine
The welding game changer Daniel Jubera of Novelis talks exclusively to Ian Adcock about its new laser weldable aluminium On the supercharge A new variable supercharger from V-Charge could herald a new era of downsized engines. Ian Adcock reports Making the MOST of in-car data Mark Fletcher takes a look at MOST and discovers how it is helping OEMs to keep pace with consumer demands
2012-05-24
Magazine
The light stuff Engineers look to lightweighting construction and agricultural equipment to contribute to efficiency while maintaining safety compliance.
2012-05-16
Magazine
New blades turning Industry is in the midst of new initiatives to develop lighter, stronger aero engine fan blades. ATM revolution-on the way at last A look at one of the biggest issues facing the air transport sector: integrating air traffic management policies and solutions. A new positioning system for aircraft structural assembly The EcoPositioner is a modular and reconfigurable positioning technology that takes into consideration the positioning task as well as operational conditions and environmental influences.
2012-05-03
Magazine
Perkins Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Sustainability matters Cummins Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Ready for more Eaton Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Unskew the talent system and build a sustainable future Sauer-Danfoss Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Value-added engineering takes time out of the equation Bosch Rexroth Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Focusing on technology, for sustainability Mentor Graphics Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Knowledge-keep it, don't lose it Dana Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Sustainability driven by technological innovation and global footprint MathWorks Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Moving toward sustainable product development with model-based design TDT Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Aerodynamic design methodology meets commercial challenges in off-highway industry
2012-05-01
Magazine
2012 bike tech takes new twists American upstart Motus readies a radical V4 sport-tourer, Ducati unleashes its most advanced V-twin, and electronic controls continue to migrate into the bike industry.
2012-04-27
Magazine
'Infernal' combustion no more Continuous improvements to the 130-year-old ICE aim to keep conventional engines ahead of electric drive. Alternative fuels tested at altitude Federal government researchers in Canada tested certain alternative fuels at simulated altitudes and found that they do offer some benefit.
2012-04-25
Magazine
Winning the power struggle Ian Adcock finds out more from Dr Robert Brand of Vacuumschmelze and drivetek's Drs Andrea Vezzini and Ludvica Baselgia Ethernet finds its place in automotive Mark Fletcher reports on why it has taken Ethernet so long to become an accepted automotive standard Smoothing the way to greater efficiency A common concern that unites the automobile industry is the quest to improve fuel efficiency and thus reduce CO₂ emissions, says Tony Lewin
2012-04-19
Magazine
Combating complexity with model-based development System and software life-cycle management processes and tools that encompass all phases of the product, from concept to end of life, are essential to meet today's innovation and quality demands.
2012-04-18
Magazine
Putting electrification to work For fleets, going green is a high priority-but making green is an even higher one. A move to 'more electric' engines Researchers detail a motor control design for the fuel system of a more electric aero engine, focusing on the necessary safety and reliability aspects. 2012-13 Hybrid Vehicles Guide A quick reference to the latest production HEVs and their key specifications.
2012-04-17
Magazine
Fab cabs While functionality cannot be compromised inside heavy trucks, their cabs increasingly mesh practicality with passenger-car sensibilities for comfort and ambience.
2012-04-11
Magazine
Putting CAE to work for non-experts CAE suppliers respond to the need to do more with less in a number of ways, including guided work flows and role-specific interfaces.
2012-04-03
Magazine
Automotive Engineering International 2012 SAE World Congress Tech Awards The editors of Automotive Engineering International preview the most innovative supplier technologies to be displayed April 24-26 in Detroit at the SAE 2012 World Congress. The top five are highlighted in this edition, but additional technologies and other event coverage can be viewed online at www.sae.org/mags/aei/saewc. The quest for better turbocharger compressors With the prevalence of automotive engine downsizing for better efficiency and emissions, greater emphasis is being placed on turbo aerodynamics to achieve wider-range and high-efficiency single-stage compressors. HCCI: The search for a better burn continues A Bosch-led consortium sponsored by the U.S. DOE, and a research team at Sandia National Laboratories, are pushing to unlock the fuel-efficiency potential of the elusive homogeneous-charge compression ignition engine.
2012-03-30
Magazine
Inside development of Unimore's high-performance Formula SAE engine The adoption of a single-cylinder engine, instead of the more powerful inline four cylinder, required a much bigger effort for getting an acceptable level of power. Academia and motorsports industry partner for enhanced performance A four-year Bachelor of Science degree in motorsports engineering at Indiana University-Purdue University Indianapolis, in addition to certificates in motorsports technology and motorsports studies, has led to the creation of some unique new college classes and associated activities. Propulsion systems for private space flight While some companies are creating high altitude air and ground launch vehicles for taking private individuals into space, companies such as XCOR Aerospace and Armadillo Aerospace are addressing other market needs in the private space flight industry. 200-mph electric racecar Drayson aims to break track records.
2012-03-29
Magazine
High-performance polymers and biofuel compatibility During the material selection process for engine components such as fuel rails, filter housings, and connectors, engineers need to take into account not only the basic tenets of metal-to-plastic conversion, but also the type of fuel and its impact on the performance of the materials.
2012-03-20
Magazine
An active ride Advanced suspension technology helps SUVs meet often conflicting requirements to perform better off road and on.
2012-03-14
Magazine
Propulsion systems enabling private space flight While some companies are creating high altitude air and ground launch vehicles for taking private individuals into space, companies such as XCOR Aerospace and Armadillo Aerospace are addressing other market needs in the private space flight industry.
2012-03-08
Magazine
Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.
2012-03-06
Magazine
Safe and sane Driver distraction, demand for connectivity, and infotainment raise new challenges in combining consumer technologies and cars. Thin on the inside Seat suppliers apply ingenuity to reduce the weight of traditional steel seat frames while trimming away foam to make smaller cars roomier. Early simulation enhances product development While simulating before design may seem to upend the traditional view of product development, many companies are realizing the benefits.
2012-03-01
Magazine
On the cusp of connected cars An auto consortium is set to put the wireless V2X safety network to the test with 120 cars in the Frankfurt region. Thinking long and hard about heavy-duty telematics A study of the factors that should be considered by a vehicle OEM when implementing a telematics solution in heavy on- and off-highway mobile equipment markets.
2012-02-28
Magazine
Solving the carbon problem Promoting a sustainable future for the transportation industry will benefit the welfare of humankind. My Baja SAE journey Every day, I realize how much Baja SAE has taught me-both in life and in engineering. Honda unveils next-gen motorcycle powertrains New engines designed for low-speed torque, fuel efficiency, and riding 'character' are coupled with new DCT and CVT transmissions. Three rules of career management for 2012 Do you have a career management plan to ensure your career growth in times of corporate chaos?
2012-02-23
Magazine
Hydraulic architecture strategies Researchers compare two different rule-based power-management strategies, in terms of their resultant fuel consumptions, through a simulation study as applied to a hybrid hydraulic multi-actuator displacement controlled system.
2012-02-21
Magazine
Bang for the buck The best technology solutions for electrified vehicles are the ones that deliver ∼80% of the performance of 'ideal' systems, at ∼60% of their cost. Rise of the P2 machines Newcomers to hybrid-vehicle development are bypassing the Prius-proven powersplit system for lower-cost and moderately less capable single-motor solutions. Rethinking battery and e-motor materials Experts reveal efforts to find lower cost, more strategically stable solutions that can match or improve system performance.
2012-02-15
Magazine
Bright outlook for glass cockpits Cockpits are adopting larger screens and touch input, using modularity to ease upgrades. Composites give copters a lift Design, fabrication, and analysis of a tail rotor blade made of composite laminated materials for a heavy transport helicopter. Taming overruns with simulation For aerospace projects, cost overruns and program delays start in the concept and proposal stage. How could using today's advanced CAE simulations earlier reduce that risk? Going modular with airborne radar Innovative approaches to solving the affordability challenge posed by too many specialist airborne surveillance systems. Efficient & effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, brings 'customer first' approach to term as SAE International's chief elective officer.
2012-02-07
Magazine
Chrysler's new Tigershark I4s aim for refinement, efficiency Developed in record time, the 2.0- and 2.4-L debut in the 2013 Dodge Dart. The 2.4-L features the first global application of MultiAir II technology. Honda unveils next-gen motorcycle powertrains New engines designed for low-speed torque, fuel efficiency, and riding 'character' are coupled with new DCT and CVT transmissions. Alternative fuels on bumpy road The price of conventional fuels is just one variable that makes it hard to know when fuel-cell, biofuel, and natural-gas technologies will come into their own. Regen braking gets a boost Researchers from Hyundai Mobis detail the development of smart booster brake systems for regenerative brake cooperative control. Efficient & effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, brings 'customer first' approach to term as SAE International's chief elective officer.
2012-02-02
Magazine
Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.
2012-01-31
Magazine
Safe, green and connected Ian Adcock recently caught up with Delphi's Dr Andrew Brown Jr, its executive director and chief technologist, to discover where the business goes in the immediate future Fusion/Mondeo…one to watch Ford's Fusion, Mondeo in Europe, is the brand's most important car so far this century. Ian Adcock and Paul Horrell report from its launch in Detroit Gearing up for change Tony Lewin reports on the most significant news from the recent CTI symposium
2012-01-28
Magazine
Electrochemical reactions Students from the Department of Automotive Engineering at the NED University of Engineering and Technology build the first onboard fuel-cell vehicle of Pakistan. The Baja balance How to combine heavy homework load with your CDS team responsibilities. Embraer progresses on clean-sheet military program It has been over two years since Embraer announced that it would be developing the KC-390 military airlift and tanker jet under a contract with the Brazilian Air Force (FAB), which established the requirements for the aircraft as it did with other Embraer military programs. Calling all recruiters Lack of response to distributed resumes leaves many wondering, is anyone out there?
2012-01-25
Magazine
Alternative fuels heat up This is a rich time for combustion researchers. The need for better fuel efficiency and improved emissions has never been greater. New software model to help engine makers meet diesel soot standards Simulation enables engineers to predict particulate formation early in the design process.
2012-01-18
Magazine
UAVs shrink as missions, and emerging technologies, grow Remotely piloted air vehicles are getting smaller in size as technology permits previously unattainable performance from smaller packages.