Criteria

Text:
Sector:
Content:
Display:

Results

Viewing 1 to 30 of 2099
2017-01-26
Magazine
Open Standard Middleware Enables New HPEC Solutions Cooling Your Embedded System What Can Your Open Standard Architecture Handle? Evaluating Key Certification Aspects of Multicore Platforms for Safety Critical Avionics Applications Simulating and Analyzing Flow for an Air-to-Air Refueling System The Ins and Outs of Spaceflight Passive Components and Assemblies Development of High Quality 4H-SiC Thick Epitaxy for Reliable High Power Electronics Using Halogenated Precursors Silicon Based Mid-Infrared SiGeSn Heterostructure Emitters and Detectors Reconfigurable Electronics and Non-Volatile Memory Research Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely Low Energy Consumption Electronics
2016-12-01
Magazine
Additive Manufacturing How 3D Printing Will Transform the A&D Support Chain Advances in Lightweight Electronics Protection Conformal Coatings Increase Reliability of Aerospace and Military Assemblies Powering Outer Space An In-Depth Look at Aerospace Battery Technology Using High Bandwidth Oscilloscopes to Analyze Radar and Electronic Warfare Systems Bio-inspired Airborne Infrastructure Reconfiguration (BioAIR) EMI Analysis Software Helps Telescope Group Simulate RFI Mitigation Epitaxial Growth of Rhenium with Sputtering Processing and Characterization of Polycrystalline YAG (Yttrium Aluminum Garnet) Core-Clad Fibers Multi-Scale Analysis of Deformation and Failure in Polycrystalline Titanium Alloys Under High Strain Rates Abrasion Testing of Products Containing Nanomaterials Spectrum Fatigue of 7075-T651 Aluminum Alloy under Overloading and Underloading
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-10-03
Magazine
Achieving Performance Advantages in Unmanned Systems Unmanned Vehicle Systems (UVS) are reaching new levels of functionality and performance, and it's not just for air vehicles either. COTS Embedded Systems and Link Budgets The days of proprietary embedded computing systems in military systems are numbered. Custom Designing Enclosures Using 3-D CAD Modeling Due to the advancement of 3-D computer-aided design software, enclosure manufacturing is not what it used to be. Technology advances industry. Fiber Optic Multi-Sensing Platforms Enabling Innovation Across Aerospace Organizations RECAT Wake Turbulence Recategorization New Concept for Improving the Performance of Electrically Small Antennas Microwave Radiometer for Advanced Nanosatellite Control Systems Secret Sharing Schemes and Advanced Encryption Standard SIPHER: Scalable Implementation of Primitives for Homomorphic Encryption Using Mathematics to Make Computing on Encrypted Data Secure and Practical
2016-09-01
Magazine
Ruling the skies Warsaw University of Technology and Georgia Tech dominate SAE Aero Design competitions. European teams take top spots at FSAE Michigan, U.S. teams at FSAE Lincoln Universitat Stuttgart of Germany and Auburn University of the U.S. take crowns at SAE Collegiate Design Series Formula competitions. Michigan Baja Racing repeats as Baja SAE season champion Coming in second is Rochester Institute of Technology, which was victorious in one of the 3 Baja SAE competitions.
2016-08-16
Magazine
Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-01
Magazine
Seeing the Light Achieving Full-Color, Day or Night Readability for Flat-Panel Displays Multiple Node Networking Using PCIe Interconnects PCI Express (PCIe) interconnects, and how they can be used to support multiple node low latency data transfers over copper or optical cables, is gaining momentum in embedded computing solutions. Zero-Emissions Electric Aircraft Theory vs Reality Analyzing Radar Signals With Demodulation Combining Software and Hardware for Highly Specialized Multichannel Spectrum Monitoring Advanced Thermal Management Solutions Thermoelectric Cooling Thermal Ground Planes Thermal Management of Laser Diodes The Effect of Substrate Emissivity on the Spectral Emission of a Hot-Gas Overlayer Process Approach to Determining Quality Inspection Deployment Experimental Setup to Assess Blast and Penetration-Induced Secondary Debris in a Military Operations in Urban Terrain (MOUT) Environment Non-Contact Circuit for Real-Time Electric and Magnetic Field Measurements
2016-06-01
Magazine
Digital Design Tools Simulating Thermal Expansion in Composites with Expanded Metal Foil for Lightning Protection Rugged Computing Designing VME Power Systems with Standard Modules Optical Sensors Optical Ice Sensors for UAVs Rotorcraft Technology Rotorcraft Icing Computational Tool Development RF & Microwave Technology Curled RF MEMS Switches for On-Chip Design: Design Software Supports BAE System's Mixed-Signal Chip Design
2016-05-17
Magazine
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
2016-05-02
Magazine
UAV Technology Using SWaP-C Reductions to Improve UAS/UGV Mission Capabilities UGV Technology Designing Rugged Computing Platforms for UGVs UUV & Robotics Technology Bi-manual Dexterous Manipulation for Maritime Explosive Ordnance Disposal UUV Technology Applying UUV Advances to Safeguard Harbors and Littoral Waters Robotics Technology Designing a Robot to Counter Vehicle-Borne Improvised Explosive Devices
2016-04-01
Magazine
Electronic Warfare Next Generation FPGAs for Electronic Warfare Systems Materials: Composites Managing the Impact of Nanomaterials in Aerospace Manufacturing Aerospace Materials/Manufacturing Turbine Flow Meters Alternative Power Sources Designing a Power Generation System for a More-Electric Aircraft
2016-03-01
Magazine
A beast of its own kind The University of Michigan Solar Car Team falls a bit short in 2015 Bridgestone World Solar Challenge, but distinguishes itself nonetheless. Finding career inspiration via algorithm Participation in collegiate engineering competitions can reveal untapped talents and interests. Just ask Ohio State student Katherine Bovee. SAE 2016 World Congress preview Powering Possibilities is Toyota's goal at SAE 2016 World Congress.
2016-02-16
Magazine
Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.
2016-02-01
Magazine
Stanford goes solar down under Team takes sixth place in Bridgestone World Solar Challenge to cap a rigorous two-year design and development program. Taking the lead Being in charge of an SAE Student Chapter entails everything from organizing meetings to issuing 'nastygrams.' A winning video from a winning Collegiate Design Series team The defending champion of the Formula SAE Michigan competition, Oregon State University, has found another way to win. SAE U.K. Section co-hosts lecture series 'starring' NASA engineer/expert Dr. Ravi Margasahayam of NASA is the engineer responsible for ensuring payload safety for the Space Shuttle and the International Space Station.
2016-02-01
Magazine
Clamoring for more entertainment Connected consumers drive demand for bandwidth, though seatback entertainment remains popular. Fighting for life in military markets Airbus Defense & Space is looking to revitalize and ramp up production rates of its military aircraft portfolio.
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2015-12-01
Magazine
Touch and go Avionics developments are changing life in the cockpit and at airborne work stations Sandwich cores for the future Decreasing weight while increasing strength is always critical, from airliners to future space missions to Mars. Research in sandwich cores today may lead to radical improvements in the future.
2015-11-03
Magazine
Behind-the-scenes methods have made MRacing, the team from the University of Michigan-Ann Arbor, a consistent contender in the Formula SAE student design competition. Presenting their winning aero design to the SAE International Board of Directors, University of Akron students tell a story of engineering excellence and resiliency. Presenting their winning aero design to the SAE International Board of Directors, University of Akron students tell a story of engineering excellence and resiliency. Eleven students from Montreal university journey to Seattle for an education on aerospace technology and aerospace careers.
2015-10-01
Magazine
Finding success on an international track Student members of the University of Missouri's Formula SAE team are learning firsthand that international collaboration is the future of engineering. A vision. A car. A cause. New Mexico State Aggies are tough enough to race pink. CyberAuto Challenge helps close talent gap Having a supply of high-quality young engineers is key to beefing up the automotive industry's cyber defenses.
2015-10-01
Magazine
Powering on Rolls-Royce's Chief Engineer discusses how new technologies in the Trent XWB family of engines are inspiring current R&D design and evaluation work as part of its strategic roadmap for future big fanjets. Ongoing development work and associated test programs extend across a broad range of activities and involve many partners. Countering cybersecurity threats against unmanned vehicle systems Cranfield University researchers have developed a monitoring system whose purpose is to monitor mission profile implementation at both high level mission execution and at lower level software code operation to tackle specific threats of malicious code and possible spurious commands received over a vehicle's data links.
2015-09-01
Magazine
UMich-Ann Arbor team takes home Baja season's Iron Team Award Cornell University also had a strong 2014 season, but not strong enough to fend off Michigan Baja Racing. Georgia Tech and Warsaw University were double-winners at SAE Aero Design competitions University of Akron and University of Cincinnati were the other winners at the twin 3-class competitions, the former setting a record in the process. West Coast teams win 2 of 3 Formula SAE events Oregon State captures its fifth crown while Jose State enjoys its first overall victory and UPenn tops the electric field. Taking action early to conquer the STEM crisis Interest in STEM subjects falls precipitously as students progress through elementary and middle school.
2015-08-03
Magazine
Big Data, aircraft, and a better future Aircraft manufacturers, in particular engine makers, are exploiting the opportunities that come with collecting the vast amount of data available, from customer reports to engine exhaust temperatures. Why is it potentially so useful? What are some of the best ways to use it? Let the good times continue to roll The booming international commercial aviation sector continues to be a bright light leading the future of the aerospace industry.
2015-06-01
Magazine
Regional and bizjets refined and redefined As the regional and business jet markets steadily rebound, so too do the propulsion technologies that will provide airframers and their customers competitive advantage. Getting it right with composites With composites now a mainstay in most new aircraft designs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-05-19
Magazine
Getting greener To meet upcoming fuel economy and emissions regulations, the developmental homogeneous charge compression ignition (HCCI) engine shows promise, but pursuit of more conventional engine technologies may be the better path. Highlights of Baja SAEINDIA The 2015 event, the 8th edition with the theme of Beyond Boundaries, was won by the College of Engineering, Pune. Rise of the underdogs Problem-plagued effort last year spurs Baja SAE team from VIT University of India to overhaul itself and its car. Testing reality in an increasingly complex design space Digital simulation tools have transformed the designing and testing of new aircraft, as well as the way they are manufactured and sustained.
2015-05-01
Magazine
Unmanned Aerial Systems Deploying Next-Generation UAS Platforms with 3U VPX Unmanned Ground Vehicles UGVs - On the Cutting Edge of Thermal Management Unmanned Surface/Underwater Vehicles Controlling the Seas - Introducing a New Concept in Autonomous Surface/Underwater Vehicles Robotics Connectivity in Robotic Systems
2015-04-01
Magazine
Deep thinking about deep space NASA is mining the rich fields of knowledge and creativity in the minds of university students to improve living and working conditions in space. Rise of the underdogs Problem-plagued effort last year spurs Baja SAE team from VIT University of India to overhaul itself and its car. Materials, data-aq packages among choices touted in Collegiate Cup contest Central Michigan's Baja team, which did some impressive materials analyses, takes home the SAE Mid-Michigan Section's trophy as part of that professional group's Engineers Week activities. Toyota looks for more from college students than high GPA "Those that participate in an SAE related-activity display passion for the automotive industry, and these candidates are ideal for our organization."
2015-04-01
Magazine
Propulsion Fanjet Evolution - the Next Steps Composites Dry Drilling Composites Using Carbon Dioxide Cooling
2015-02-02
Magazine
Taking on the Valeo Innovation Challenge Two Canadian teams-the University of Ottawa and the University of Waterloo-finished in the top 3 among about 1,000 other universities from around the world in this challenge devoted to spurring innovative ideas for transportation. Colorado State University designs fuel-cell plug-in hybrid system Competing in the EcoCAR2 competition using a Chevrolet Malibu, the Colorado State team designed a system that features a 15-kW polymer electrolyte membrane fuel cell system, an 18.9-kW•h/177-kW lithium-ion battery, and a 145-kW motor. Cal State Fullerton combines art and engineering Team's submission on its Formula SAE car won first place in the second annual Generation Auto video contest organized in part by SAE International. Collaborative research project leads to potentially swarming VTOL UAVs The AVIGLE VTOL (vertical takeoff and landing) unmanned aerial vehicle was developed via collaboration by a variety of entities for a variety of applications.
2015-02-02
Magazine
Wireless sensing--the road to future digital avionics A look at the comparative performance of wired and wireless sensors, type of wireless sensors & interfaces, frequency performance, protocols, network topologies and qualification standards. Testing reality in an increasingly complex design space Digital simulation tools have transformed the designing and testing of new airplanes, as well as the way they are manufactured and sustained.
2014-12-01
Magazine
Materials Infusing Lightweight Composite Structures Business Jets Business Jets Bounce Back
Viewing 1 to 30 of 2099